Skip to content

Toshiba unveils D2PAK+ 40V 160A 1.5mΩ MOSFET for Automotive Applications

Toshiba Electronics Europe has expanded its family of automotive power MOSFETs with the TK1R5R04PB – the first device in its new low-resistance D2PAK+ package. While the D2PAK+ has the same footprint as a conventional D2PAK (or TO-263) package, it offers reduced package resistance. This is thanks to a source pin that is much wider near … Continued

Toshiba Electronics Europe has expanded its family of automotive power MOSFETs with the TK1R5R04PB – the first device in its new low-resistance D2PAK+ package. While the D2PAK+ has the same footprint as a conventional D2PAK (or TO-263) package, it offers reduced package resistance. This is thanks to a source pin that is much wider near to the mould surface than that of a conventional D2PAK.

The TK1R5R04PB is rated for 40V and 160A and has a maximum on resistance of 1.5mΩ (VGS = 10V). Minimum and maximum voltage threshold ratings (Vth) are 2v and 3V respectively.

Toshiba’s latest UMOS IX-H wafer process has been used to produce the TK1R5R04PB. U-MOS IX-H has an excellent switching ripple suppression capability and can contribute to EMI noise reduction in applications.

Target applications for the new device include automotive pumps, fans, DC-DC converters and load switches.

The TK1R5R04PB will conform with AEC-Q101 automotive level qualification requirements.

https://www.automotiveworld.com/news-releases/toshiba-unveils-d2pak-40v-160a-1-5m%cf%89-mosfet-automotive-applications/

Welcome back , to continue browsing the site, please click here